Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Integration Webitel with PBX 3CX

To combine numbering plans on the 3CX side, you need to create 2 SIP trunks - one for inbound calls, and the other for outbound calls.

In this example, the numbering plan on the 3CX side is 3-digit numbers (which start with "5"), and on the Webitel side - 4-digit numbers (which start with "1").

Configuration example

Calls from 3CX to Webitel

In Webitel, in the Users section, create a new user with the number 10020:


On the 3CX sides, create a SIP Trunk with the "Generic" type:


In the gateway card, we write the registration data of the Webitel user: Username, password, domain, sip server:



After saving, the trunk should be registered successfully:


Go to the "Outbound Rules" menu on the 3CX side and create a rule that all 4-digit numbers should be sent in this trunk:



Now we can make calls from 3CX to any Webitel internal numbers.

Calls from Webitel to 3CX

In 3CX, in the SIP Trunks section, add a new entry with the "Bridge - Slave" type:


We give the name, register the login 10021 and create a password.

In the Gateways section on the Webitel side, create a new gateway with registration, where we enter the data of the newly created bridge:


After saving, successful registration should occur:


Go to the "Default callflow" section and create a routing scheme in which we indicate that all 2-digit numbers that start with "5" must be sent through this gateway:


"ringback": {
"call": {
"name": "$$

Unknown macro: {ru-ring}

"type": "tone"
"transfer": {
"name": "$$

"type": "tone"

Unknown macro: { "action"}

"bridge": {
"endpoints": [

Unknown macro: { "type"}


Unknown macro: { "hangup"}


Now we can make calls from Webitel to any 3CX internal numbers.

The description is relevant for Webitel version 3.11

  • No labels